Products tagged with 'safety cages'

Sort by
Display per page

100 Litre Corrosive Safety Cabinet 2 Doors and 1 Shelf

Part No: EW-CC1008
Keep corrosives safe and secure. Cabinets have a corrosion-resistant powder coat finish and includes trilingual warning label, plus grounding attachment. Cabinets for corrosives have the same quality safety features as the cabinets for flammables. 2 doors, 1 shelves, Under bench metal cabinet, For added protection additional undercoat etch is used before high gloss powder coat finish, Sequential door closing mechanism, Key lock door handles and three point latch locking
$2,410.00 excl GST

Collapsible Forklift Safety Cage / Folding Safety Cage

Part No: EW-SC-C
The EW-SC-C Collapsible zinc forklift safety cage / folding forklift safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble and can then be packed up again when finished and stored
$1,170.00 excl GST

EW-WP-G-Forklift Work Platform

Part No: EW-WP-G
The EW-WP-G Forklift Work Platform is designed for forklift use to safely carry out tasks of short duration and occasional usage, such as maintenance. This safety cage is suitable for up to two people and is manufactured in accordance with Australian Standard AS 2359.1.
$1,840.00 excl GST

Folding Safety Cage Folding /Collapsible

Part No: EW-SC-F
The EW-SCF folding safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble with stock Sydney, Brisbane, Melbourne and Perth
$1,240.00 excl GST

Forklift Goods Cage 1200mm x 1200mm Welded

Part No: EW-AUS-FGC
Order Picking Cage with inward opening side gates is manufactured in accordance with Australian Standard AS 5144.3:2019, this safety cage is strictly for use with a dedicated Order Picker or Stock Picker forklift truck. Size: 1200mm square x 1100mm.
$1,910.00 excl GST

Forklift Order Picker Cage - Stock Picking Cage

Part No: EW-WP-OP
Type WP-OP Order Picking Cage, suitable strictly for "Order Picker" or "Stock Picker" fork trucks.
Call for pricing

Forklift Order Picker Cage with Double Gates

Part No: EW-WP-OPG
Built to the same dimensions as the WP-OP, but also fitted with a full width outward opening gate, enabling access to stock where required.
Call for pricing

Forklift Safety Cage - Flat Packed

Part No: EW-WP-N
The EW-WP-N forklift safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble.
$1,020.00 excl GST

Forklift Safety Cage - In Stock

Part No: EW-SC1
The EW-SC1 forklift safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble. Same day pick up available Brisbane, Sydney, Melbourne, Adelaide and Perth.
$1,040.00 excl GST

Forklift Safety Cage Durgal - Australian Made

Part No: EW-AUS-SCG
This Forklift Safety Cage with Rail Sides is a cost effective design alternative to our standard Forklift Safety Cage (Mesh Sides). Fully welded in accordance with Australian Standard for Forklifts AS2359.1, this forklift cage has a fully pressed checker plate tub section, supported with a welded base structure to offer a robust design that will handle any task required for height safety. There is also a standard self closing gate and removable head board section with mesh infill panels on the rear of the cage.
$1,470.00 excl GST

Forklift Safety Cage Flat Packed with Mesh Sides

Part No: EW-WP-MSF
The EW-WP-MSF forklift safety cage has wire mesh sides and is shipped flatpacked so is very cheap to freight and is very easy to assemble.
$1,090.00 excl GST

Forklift Safety Cage Galvanized - Fully Welded

Part No: EW-WP-G
The EW-WP is a fully welded safety cage with optional anchor points for safety harness and is available in galvanised finish.
$1,840.00 excl GST

Forklift Safety Cage Harness

Part No: EW-SP-0262
Elevated work platform safety harness fitted with shock absorbing lanyard to rear fall arrest D
$355.00 excl GST

Forklift Safety Cage Mesh Sides - Australian Made

Part No: EW-AUS-SCM
This Forklift Safety Cage (Mesh Sides) has a fully welded construction in accordance with the Australian Standards for Forklifts (AS2359.1 Section 12) and is the perfect solution for tough high-access tasks.
$2,170.00 excl GST

Forklift Safety Cage Powder Coated Rail Sides - Australian Made

Part No: EW-AUS-SCP
This Forklift Safety Cage with Rail Sides is a cost effective design alternative to our standard Forklift Safety Cage (Mesh Sides). Fully welded in accordance with Australian Standard for Forklifts AS2359.1, this forklift cage has a fully pressed checker plate tub section, supported with a welded base structure to offer a robust design that will handle any task required for height safety. There is also a standard self closing gate and removable head board section with mesh infill panels on the rear of the cage.
$1,590.00 excl GST

Forklift Safety Cage Zinc Flat Packed

Part No: EW-SCZAP
The EW-SCZAP zinc forklift safety cage is shipped flatpacked so is very cheap to freight and is very easy to assemble. In Stock Sydney, Brisbane, Melbourne and Perth
$860.00 excl GST

Fully Welded Painted Safety Cage

Part No: EW-SC4-W
The EW-SC4-W is an Australian Made welded safety cage with stock available Sydney, Brisbane, Melbourne and Perth*.
$2,120.00 excl GST

Lifting Frame including Shackles and Hooks

Part No: EW-CS-CSPNCL
Square Spreader to suit EW-CSP4 Crane Cage including shackles and hooks
$1,420.00 excl GST

Miller Scorpion Fall Arrestor Fall Protection for Safety Cage

Part No: EW-SCORPION
The Miller Scorpion fall arrestor is an affordable alternative to shock-absorbing lanyards - the lightweight 2.7m web retraction requires less fall clearance.
Call for pricing

Order Picker Cage with Inward Opening Side Gates

Part No: EW-WP-OPSG
Order Picking Cage with inward opening side gates is manufactured in accordance with Australian Standard AS 5144.3:2019, this safety cage is strictly for use with a dedicated “Order Picker” or “Stock Picker” forklift truck.
Call for pricing

Order Picking Cage - Australian Made

Part No: EW-AUS-OPC
Pick and pack goods safely at heights with the this Order Picking Cage. This cage is manufactured to suit electric stock pickers only, and allows the operator clear and safe access. This is a safe alternative to a standard timber pallet. The central timber rail allows the picker to grab the cage as on a standard timber pallet. Chain locks are provided to attach to the Stock Picker.
$2,840.00 excl GST