Forklift Jib Attachments usually slide straight over your existing Forks and are either chained back to the carriage or hard pinned to the back of the forks. They not only give you a safe single hook that shares the load along the fork lengths but can give you added lifting height by using a Tilting Jib or extended lifting capacity by using a Telescopic Forklift Jib Attachment.
Forklift Extension Jibs are an economical way to maneuver items in confined spaces using your Fork Truck to reach almost 2.8 metres from the mast. Multi angle positioning allows extra height and load capacity using the 4 stage locating pin. This Extension Jib is a fully certified lifting device and comes standard with a compliance plate attached. Ensure the net lifting capacity remains at 0.8 times your forklift capacity to allow for a swinging load.
2 x lifting positions, Slim line allowing for best possible visibility, Lifting hook included, Zinc finish, Secured to the forklift by two locking pins. In stock Sydney , Brisbane, Melbourne and Perth.
The Budget Tilt Forklift Jib Attachment 3500kg with 2365mm reach are a valuable addition to any workshop. Tilt Forklift Jib Attachment provides optimum safety for the forklift operator and assistants during any 'lift by hook' application. Stock Sydney, Brisbane, Melbourne and Perth
The Budget Tilt Jib 4700kg are a valuable addition to any workshop. Available in three models rated at 3500kg, 4700kg and 7500kg Working Load Limit (WLL), they provide optimum safety for the forklift operator and assistants during any 'lift by hook' application.
The Budget Tilt Jib 7500kg are a valuable addition to any workshop. Available in three models rated at 3500kg, 4700kg and 7500kg Working Load Limit (WLL), they provide optimum safety for the forklift operator and assistants during any 'lift by hook' application.
The EW-SFJCS100 Telescopic Jib is an affordable 10 tonne general purpose short reach forklift jib designed to suit most lifting and maintenance requirements of larger forklifts that need to manoeuvre in confined spaces.
The EW-FSB200 Fork Truck Battery Jib is designed for the quick, safe removal and replacement of battery packs in electrically operated forklifts. The unit is equipped with multiple lifting points to suit either 2 or 4 lift point batteries with outer hook points at 500 x 900mm centres and is suitable for use with either forklift or crane.
The EW-FJ-TOWS Forklift Tow Jib Attachment is a dual purpose, lightweight and simple to use forklift attachment which allows towing with the attached 50mm towball, and doubles as a 2000kg WLL lifting jib complete with 2T safety swivel hook. Includes two lifting hook positions and utilises two fork locking pins to secure the jib to the forks during operation.
EW-SJ4500Z telescopic forklift jib attachment with 4500kg capacity s designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Stock available Sydney, Brisbane, Melbourne and Perth